Remotec Z-URC550 V1 Uživatelský manuál stáhnout pdf (Strana 10)

Note2: XpressZetup

cannot support “Multi-Channel Device”, please

refer to [Adding Device to the Network] and [Adding Device/End-point

to a group] for normal setup procedure.

Removing Device from a Group

Step Setup Key LED Indication Status

Press in

XpressZetup

area

• “OK＂ LED on

• “LED_A＂ flashes

rapidly

Select a group number

from 1 to 16 (1-8 or

1-8)

• “LED_A＂ off

• “LED_B＂ flashes

rapidly

Press the program button

on the target device

• “OK＂ LED flashes once

then turns off

• Device been removed from

the Group successfully

Note1: If the ERROR LED turns on or flashes, meaning the setup

process is failed. Please redo the process.

Note2: XpressZetup

cannot support “Multi-Channel Device”, please

refer to [Removing Device/End-point from a group] for normal setup

procedure.

Note3: This process will only remove the target device from its

assigned group but will not exclude it from the network.

Removing all Devices from a Group

Step Setup Key LED Indication Status

Press and hold

in XpressZetup

area

• “OK＂ LED on

• “LED_A＂ flashes

rapidly

Select a group number

from 1 to 16 (1-8 or

1-8)

• “LED_A＂ off

• “LED_B＂ flashes

rapidly

• “OK＂ LED flashes once

then turns off

• Device been deleted from

the Group successfully

Note1: If the ERROR LED turns on or flashes, meaning the setup

process is failed. Please redo the process.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Komentáře k této Příručce

Žádné komentáře

Remotec Z-URC550 V1 Uživatelský manuál Strana 10

Komentáře k této Příručce