Remotec ZTS-110 V3.12 Uživatelský manuál stáhnout pdf (Strana 12)

Activate/Deactivate Easy Mode

The ZTS-110 is default with Easy mode, below illustrates the functions of Easy

mode:

- Active functions: Change Mode, change Fan mode and Temperature Scale

selection

- Inactive functions: Scheduling, Program Mode, Clock Display, Setting Time,

Setting Swing, Setting, Differential Set-Point and Advanced

Recovery Mode

User can use Easy mode to disable Schedule function and the schedule will be

controlled by Z-Wave gateway. User can still change temperature and mode by

pressing the local physical buttons.

User can deactivate the Easy mode by local "Setting Mode" or Z-Wave

Configuration Parameter number 8. (Please refer to Z-Wave Configuration

parameters table).

Below is the example by local setting:

Temperature Scale selection in Easy Mode

LCD indicationProcedure / Description

Press and hold "Mode" key for 2 seconds to

entry the setting mode.

It will display "EASY YES" if it stays in

Easy mode. Otherwise, it will display "EASY no"

if Easy mode is deactivated.

Press Up/Down key to toggle the selection.

Press "Prog" key to confirm your settings.

- it will go back to Home page if selected "YES".

- it will go to Day setting if selected "no".

Press and hold "Prog" keys for 2 seconds to

entry temperature F (Fahrenheit) -> C (Celsius)

selection mode

Press Up/Down key to toggle the temperature F

(Fahrenheit) -> C (Celsius) selection.

Press "Prog" key to confirm it and back to the

Home page.

LCD indicationProcedure / Description

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Žádné komentáře

Remotec ZTS-110 V3.12 Uživatelský manuál Strana 12